4reeperfec4.netlify.app

When you are starting out, there are a lot of things to learn. Like how to record with a mic in FL Studio.

• Fl Studio Mac Microphone Setup
• Fl Studio Mac Microphone App
• Fl Studio Mac Microphone Bluetooth
• Cheap Studio Microphone

I have a mac and am using FL Studio 20, I installed the spitfire thing and have downloaded a few of the LABS instruments but am struggling to understand how to put it into FL Studio. In the settings where it says install location the VST2 is in. Finding FL Studio-specific gear can be tough. Despite its popularity, this DAW is often not taken seriously by equipment manufacturers. However, this is slowly changing and more and more brands are making FL-specific gear. In this guide, we look at the best audio interface for FL Studio to help you make the right purchase decision. Download FL Studio 20 MacOSX Full Version Gratis. FL Studio 20 Mac Full Crack Download Terbaru- Sebuah software audio editing, mixing, mastering, effects terbaik untuk MacOSX. Aplikasi ini mungkin lebih familiar dengan sebutan Fruity Loops Mac. Dikembangkan sudah lebih dari satu decade, tentunya software audio editing mac ini sudah sangat. Image Line’s FL Studio is a highly-developed digital audio workshop station. Although it’s primarily geared towards electronic music production, it’s great for any type of audio project. Ok, so I'm trying to use the Vocodex plug-in on FL Studio 10. I know how to use it, but I can't get my microphone to work. It's a Logitech mic. I have it hooked into the mic port at the front of my computer.Whenever I try to select a mic input, it makes alot of VERY loud clicking noises. If anyone could help me out, that'd help alot! FL Studio is a fully-featured music production environment that provides multi-track audio recording, sequencing and mixing for professional and amateur artists who need to create high quality music tracks. State of the art audio handling tools. With FL Studio’s help, you can take advantage.

When you are new to the process it can seem overwhelming. But it doesn’t have to feel intimidating or overwhelming.

In this post I’ll cover the basics about how to set up and record, from a microphone in FL Studio.

It may seem complicated at first.

But I promise once you have done it a couple of times, it’ll feel like second nature.

Let’s get to it.

IF you want to see how I produce songs in FL Studio, check this FREE course out!

Basic Steps to setup your mic and interface

We’ll cover the components you need, how to set everything up the first time, and how to start recording.

I’m going to give you two options you can use for recording.
You can pick which method works best for your workflow.

Here are the pieces of audio gear you are going to need to follow along with this post:

1. A Microphone
2. An Audio Interface
3. A Microphone cable
4. A purchased copy of FL Studio Producer or Signature Edition.
5. Laptop or Computer
6. A pair of headphones

*Note if you are using a USB Microphone to record, the process is a little bit different.

Let’s get back to this example.

We’re going to do a couple of things to make recording happen:

1. Setup the gear we need
2. Open FL Studio
3. Save the project
4. Configure the audio interface
   1. ASIO Device
   2. Buffer Size
5. Set the location to record audio to
6. Setup the mixer track
7. Set up the transport controls
8. Record audio
   1. Option to record from playlist
   2. Option to record with Edison
9. Advanced options
   1. Loop recording
   2. Headphone mix

STEP 1 – Setup the Gear

Plug the audio interface into the computer.

Audio interfaces come in a variety of connections.
So plug into the correct port (USB, Firewire, or Thunderbolt).

Now plug the microphone cable into the mic.
Make sure that the Phantom power button is not on on your audio interface.

And then plug the other end into your audio interface.

If the microphone needs phantom power (+48V), then push the +48V button.

Generally, condenser mics need phantom power. Dynamic mics do not.

Having phantom power on when you plug the mic into the audio interface can cause damage to your microphone.

So we want to keep that microphone working well for a long time.

Open up FL Studio

Now let’s open up FL Studio.

I’m currently running version 20 of FL Studio. Which as of 2019, is the latest version.

It looks this when you open it up …

Save the Project

First thing I like to do is to save the project.
It may seem a little weird to save a song before we’ve started.

But it’s just to help prepare where we are going to record things.

FL Studio calls the files you save projects, but really it’s a song.

Hit CTRL + S on your keyboard.

This will bring up a dialog window that lets you choose where you want to save the project.

So name the song what you want to. And then choose where you want to save it on your computer.

And finally press the save button.

Setting up the Audio Interface

Let’s get everything setup to record from our mic.

To get to the settings window in FL Studio, press F10 on your keyboard.

This will bring up a dialog box that has a couple tabs across the top like Midi, Audio, General and File.

This is the settings window in FL Studio.

You’re going to click on the Audio tab.
And you should see a section called input/output.

So underneath is the device drop down menu.
You want to look for your device (audio interface).

There should be some options at the top that are called direct sound devices.
And underneath of that there should be some called ASIO devices.

We want to look at the drop down menu of ASIO devices.

ASIO Settings

So from the ASIO devices menu select the driver for your audio interface.

The name of the driver might not be exactly the name of your audio interface.
I am working off of a Presonus AudioBox iTwo audio interface in this example.

And in my case the ASIO device is called AudioBox ASIO Driver.

So I select that as my ASIO Device.
And then we need to set up the buffer.

Buffer Settings

Below the device drop down menu you’ll see another box that says buffer length.

I’m not going to go into a lot of detail about this.

But for recording, you want the buffer setting as low as you can get it, without it starting to clip, crackle, or pop.

This will prevent you from hearing a delay when you go to record your audio. It will also make sure that you get a clean sound from your interface.

In my case I’m selecting a buffer length of about 6-8 milliseconds. For me, if I try to go lower than that I start to get some crackle in my recordings.

You will be able to hear pops and crackles in your recording if you have it set too low.

You can see in this menu if you have had underruns.

So now we have the audio interface setup.

Now FL Studio can receive the input from the audio interface.

So let’s choose where we are going to save our recorded files.

Choose where to save the audio files

While we still have the Setting Window open let’s do one more thing.

We’re going to go over to the Project tab.

You should see a box beneath that that says data folder.

This lets you pick the folder on your computer that you want to save the recorded audio to.

Click on the folder icon and select where you want the data to be stored.

And now we’ll move on to setting up the mixer track.

Setting up the mixer track

This is where we set up the microphone input from the mixer track.

This will get the input from the microphone and the audio interface into a mixer track in FL Studio.

The first thing that we’re going to need to do is set up your microphone in a mixer Channel.

Press F9 on your keyboard and that will bring up the mixer window.

You should see a whole bunch of vertical bars, They will be titled Insert 1, Insert 2, and so on.

These are all mixer tracks for the project that you’re working on.

Let’s pick Insert 4 for this example.

When you click on it you’ll see a green box around it. And the fader will turn green at the bottom.

If you go to the right side of the mixer window you’ll see another box. In that box you’ll see Slot 1, Slot 2, and so on.

Fl Studio Mac Microphone Setup

These are your effects slots that you can put on an individual mixer Channel.

But we’re going to be paying attention to the drop-down menu that’s at the top. It has an arrow pointing into a box. That is where you are going to select the input that you connected your to.

When you look at the drop-down menu you should see options that have your audio interface name and then stereo and mono track options.

Since we’re recording one microphone I’m going to assume that it’s a mono source. Because most mics are mono sources unless you have a stereo microphone.

So I select mic input one. Because that’s where I plugged in my microphone.

As you talk into the microphone you should see the bars on the insert for channel moving up and down. This means that you’re getting signal into the insert Channel.

Which means that you set it up right. Woohoo!

Now onto the transport controls.

Setting up transport controls

Up at the top of the FL Studio program you’ll see some transport controls.
These are the play button, the stop button and record button.

Right click on the record button and you should see some options.
It should have a box that says recording filter. And underneath of that with options to check automation, notes, audio, and clips.

Since we are recording audio we want to make sure that the audio option is checked by right-clicking.

Next to the play button there is a button that says pat on the top and song on the bottom.

Make sure that the song button is highlighted. Because that will allow us to record directly to the playlist. If it’s not selected, press the song button now.

Now you should see a green arrow show up in your playlist window and the song button should be highlighted in green.

I also like to set up a count in before it starts recording.

This option gives you a four count click before the recording starts. Which is helpful.

Press CTRL + P to turn this option on.

Alright, you’ve finished all the setup.
Now it’s time to do some recording.

Record Audio

What I like about FL Studio is that there are several different ways of doing everything.

So there are a couple different options for recording audio:

1. Recording directly into the playlist
2. Recording through Edison

Before you start recording, make sure to plug in your headphones.
You don’t want the audio from the song to be bleeding into your mic.
You’ll get some weird sounds and feedback from doing that.

We’ll cover recording into the playlist first, since that is the most common.

Recording in the playlist in FL Studio

Open up the Mixer window by pressing F9.
Go to Insert 4 where we set up the mic.
At the bottom of the fader there is a track arm button.
Press that so it turns red.

You can also right click on the arm track button to bring up a window.
You could save the audio file to a different location if you want. And you can give the file whatever name you choose.

Open up the playlist window by pressing F5.
Click a spot on the playlist where you would want to start your recording.
I like to choose a spot a little before so it give me more time.

Now click on the record button in the transport bar, and wait for the count in.

Then start recording audio.

Once you are finished. Press Stop in the transport controls, or press the Space bar.

And that’s it. You’ve learned how to record a mic in FL Studio.
But I’ll show you another way to do it as well.

Recording a mic in Edison in FL Studio

Let’s get back to the mixer window.
Press F9.
Then go to Insert 4.
Go to the right side where the Slots are.
Click on the down arrow in Slot 1.
A window will come up that you will show you all the available plugins.

Look for the miscellaneous section and you should see Edison.
Pick Edison and a window should pop up.

To the right of the record button is a drop down menu.
Select On Play. And then press the record button.
Nothing will happen at this point, so don’t freak out.

This option just arms Edison to record.
Then go to your playlist window.
Click where in the song you want to start recording.

I like to move the marker to a little bit before that.
It gives you a little extra time before it starts the part you want to record.

When you are ready hit the play button.
This will start the recording in Edison.

When you are done, press the Stop on Edison.
And then you can Press stop on the Transport Controls in the Playlist.

Fl Studio Mac Microphone App

There’s a button in the top right side of Edison.
Click that and then drag what you recorded into the playlist where you set your marker to start.
Everything will be lined up.

And that’s all you have to do to record audio in Edison.

BONUS TIPS – ADVANCED RECORDING OPTIONS

Now we’re getting into the extra credit section. You don’t have to do this.

But this is a way to take your mic recording skills to the next level.

Multiple Takes

One of the reasons that I like using Edison to record is the multiple takes option.
So as I’m putting together a song, I can highlight a certain section I want to record.
Let’s take the chorus for instance.

I can go the Playlist window by pressing F5.
I right click and drag around the section of the song I want to record.
Open up Edison on the Mixer Track, with the On Play option selected.
Arm Edison to record by pressing the record button.

Now when I press Play on the transport controls it will record.
It will keep recording as many takes of that section as you want.
I could do 3-5 takes on that one part.

Stop Edison when you are done. And stop the song in the transport controls.

Now in Edison you should see multiple takes.
I can select one of those takes by double-clicking on the orange marker at the front.

Then I can drag that take into the playlist. Using the drag to playlist option on Edison. (The button that’s highlighted in blue below)

I could drag all of them in individually if wanted.
Then I could create vocal comps of the best of those takes. But that’s a different subject.

Separate Mix

Another option you can try is to set up a headphone mix for your vocalist.

Each track in the mixer window is routed by default to the Master Fader.
You can see this when you click on any of the Insert tracks. It’s the neon green line that goes to the Master Fader.

You can change the default routing of a track if you want, though.

So let’s go back to Insert 4, where we set up our mic.

Now right click on the arrow at the bottom of Insert 5. You’ll see an option box come up.
It looks like this.

Now we’ll select the option that says route to this track only.
This is going to send the audio from Insert 4 to Insert 5 only.

So we’ve set up a new signal path for Insert 4.

It used to be that Insert 4 went directly to the Master Fader.

Now Insert 4 goes to Insert 5, and then to the Master Fader.
So we’re going to set up effects on Insert 5. And that will go into the Master Fader.
So that’s what you’ll hear in the headphones.

But, we will record on Insert 4, where there will be no effects.
So we’ll have a dry signal that we can edit and add effects to later.

So click on Insert 5.
Now go the Slots on the right side of the Mixer Window.
In Slot 1, let’s pick Fruity Delay 2.
In Slot 2, let’s pick Fruity Reeverb 2.

So if you sing into the mic. You’ll hear the effects.
But, if you record the vocals from Insert 4, there won’t be any effects.

This gives you the opportunity to edit and add different effects later in your mix.

So there you have it.

You’ve learned how to record with a mic in FL Studio. And I’ve given you some bonus tips on how to record multiple takes. And even set up a separate headphone mix for a vocalist.

Learn how to produce full songs in FL Studio with this FREE class

I hope you enjoyed it.

Disclosure: When you buy through our links, we may get a commission at zero cost to you.

I recently published a review and buyer’s guide on the top ten best audio interfaces you should get if you are serious about music production.

I broke down the factors you need to consider if you need to get a superb interface, and I rounded up the post by recommending the ten best audio interface.

Since Fl studio is one of the most downloaded and used DAW application in the world, it make sense to consider recommending an interface that works best for Fl, though any audio interface / external sound-card should be able to work with Fl right out-of-the-box, as long as you have a way of connecting the audio interface to some computer with cables.

Regardless of the situation, Let me guide you on how to choose an interface for Fl studio, tips and my recommendations.

Page Contents

• How To Choose Your FL Studio Audio Interface
  • Input and Output Count (I/O)
• Recommended Audio Interface For Fl Studio
• One Last Thing!

Helpful Guide & Tips!

As you all know, an audio interface is responsible for the playback of your audio from your computer, and your pc comes preloaded with one (it might likely be in your pc or a chip on your motherboard), that chip is the one responsible for making the sound you hear or in playback.

Even if your PC has an interface by default, you might still need an external audio interface for various reasons.

And here’s why you might need one…

• You need an audio interface if you want to work with a professional microphone (XLR).
• The default interface chip on your motherboard won’t be able to correctly plug-in a balanced input, if you wish to properly plug in a balanced input or a good pair of studio monitors to check your mixes on, without an external audio interface, you won’t have anywhere to plug those in.
• If you plan on recording live instruments or vocal.

An audio interface or an external sound card would make you listen to a better representation of an audio sample.

Does that imply choosing any interface?

Fat No!

There are lots to consider before choosing an interface, knowing these factors would not only be useful but a lifesaver for you.

Before I list the things you need to consider before choosing an interface for Fl studio, let me answer one of the most asked questions about an interface.

Would an audio interface affect the quality of your rendered track?

An audio interface is used to playback a better and more precise version of your digital audio data that has been processed by your daw or music production software.

It has nothing to do with the quality of your rendered (output) tracks except if used to record or recorded sample in your track.

I guess this is an eye-opener for you about how an audio interface work, Let’s work through the proper way of choosing an audio interface for Fl Studio.

How To Choose Your FL Studio Audio Interface

There are a few factors to take into consideration when sifting through audio interfaces. I covered this part in the best audio interface guide, and I’ll cover it again.

Here’s a checklist to use:

Your Budget

The more you pay for an audio interface doesn’t result to a better interface, if you are not going for multiple recording, and if otherwise, go for a higher range (which is recommended in this guide).

Audio Interface Connector

Types of connectors are USB, Firewire and Thunderbolts. USB is mostly used in a home studio, and if your budget carries the weight, you can opt for Firewire. From personal experience, If you need a faster data transfer rate, go for Thunderbolt; it’s faster than either USB or Firewire.

Note: The higher you go, the better the transfer rate, and an added plus to your dough.

Input and Output Count (I/O)

I can’t stress this enough If you are going for multiple recordings; opt for more inputs and output for your equipment, and if you are going for fewer records; go for lesser input and output.

Don’t waste money on more input where you likely won’t use it.

Alternatively, you can use Adat for expansion, which I would explain in the next section.

Added Tip For Input and Output Count (I/O)

I/O is confusing to some, but it’s plain simple.

This is what it means…

Input means you are connecting a device into your audio interface to feed your DAW, for example, if you are recording a vocal with your mic, all you are doing is feeding your DAW the audio data recorded from your Mic.

Output means your sending “Out”, e.g. send data from your DAW software to either your studio speakers or your headphone.

Just remember – Input means “In”, and Output means “Out.”

ADAT For Expansion

This is good for minimising load (I/O), as well as maximising the Input and Output count. An Adat enabled interface will help you to expand your input count with an optical cable without buying a new interface with more count.

The cost of an ADAT-equipped interface is cheaper than buying an interface with various inputs on board.

Recommended Audio Interface For Fl Studio

Time to make your choice of an Audio interface for Fl Studio. The advantage of Fl studio 20 is that it has a super-intuitive user interface, and immensely easier to learn if you have no prior experience.

I selected some Thunderbolt connectivity interface as it is the fastest, and also some interface with an ADAT option. I also chose some USB interface as it’s relatively cheap.

As you read along with the recommendation below, note the Input and Output count if it’s expandable (ADAT), and the connector (USB or Thunderbolt).

1. UA Apollo Twin (2-in/6-out)

An audio interface wouldn’t affect the quality of rendered track unless if used to record directly into your DAW but do know UA Apollo Twin can reduce the strain on your host CPU.

It does Real-time UAD Processing for tracking through vintage compressors, EQ’s, tape machines, mic preamps, and guitar amp plug-ins with very low latency.

It’s a USB 3 audio interface that allows you to record faster than the regular USB 2.0 bus-powered. You are also powered with a stunning 24/192kHz audio conversion rate and high-quality Mic preamps.

What’s interesting about this interface is that you have an ADAT in, meaning you can expand the input of your audio interface, and also use it for processing with almost zero latency.

Who is this recommended for? – Studio of all level who wants a compact, and a portable audio interface while also providing a pro sound quality with options to expand with an ADAT in.

Technical Specifications

• 2 -input/6-output
• ADAT for more input expandability
• USB 3.0 bus-powered
• 24bit/192khz
• Compatible with Windows 7 or higher (64-bit Editions) only
• It Includes ‘Realtime Analog Classics’ plug-in bundle – featuring a vintage compressor, EQs and so on.

2. Focusrite Saffire Pro 14 (8-in/6-out)

This is one of my favorite interface of all time, and I like if for a couple of reasons:

You get high-end features at a reasonable price, come bundled with an 8-in/6-out Firewire interface with two astonishing Focusrite Mic preamps, XLR combo inputs (for balance input), line and instrument ins, and to sum all, you get an onboard DSP mixer that optimizes performance.

If you are a newbie and you’re just getting started with a suite of plugins, then you would find the latest version of the Focusrite plug-in suite useful, the suite includes Reverb, Compression, Gating, and EQ – both VST and AU compatible.

That’s not all. You also have an addition plugin packed with Saffire Pro – Xcite, which features lots of royalty-free loops, and a soft-synth to start making music right away.

In cases where you need to upgrade your connectivity, you can go from firewire to Thunderbolt with an adapter.

Technical Specifications

• 8 -input/6-output
• Firewire
• 24bit/96khz
• Xcite+ software bundle

3. Focusrite Scarlett (2-in/2-out)

Haha! One of the most used home studio interface in the world due to its portability and achieving great sound right out of the box.

You would love how this seamlessly integrates with Fl studio, a stunning conversion and sample rates up to 192kHz / 24 bit-perfect for recording two mics at once. No worries with the Mic part, you have two natural-sounding Scarlett mic preamps and the same sound quality and digital conversion as the rest of the Scarlett range.

If all you need is a compact audio interface you can use on the go, and you don’t need a lot of I/O’s, I strongly recommend this audio interface for your Fl setup. It would serve you well.

Who is this recommended for? – Beginner Studio who isn’t too concern about more I/O, or who isn’t interested in connecting multiple instruments at once.

Technical Specifications

• 2 -input/2-output
• No ADAT option
• USB bus-powered
• 24bit/192khz
• Compatible with Windows 7 or higher, and Mac OS X 10.10
  or higher

4. Audient iD14 (10-in/14-out)

Audient iD14 provides you with high-performance conversion and a sample rate of up to 24bit/96khz. It has a few more ins and outs than most of the recommended interface on this page, and the most interesting thing is that you can expand the input with ADAT in, giving you an extra layer of 8-Channel.

Rugged designed with two Audient console mic preamp, and Burr-Brown converter technology. That’s not all. You have an option for user-defined function keys; customized the way you like, and make it the hub of your studio

Who is this recommended for? – Beginner and Professional Studios who would love to start with more inputs, and expand if necessary with ADAT option.

Technical Specifications

• 10 -input/4-output + 2 Mic Preamps
• ADAT for more input expandability
• USB 2.0 bus-powered
• 24bit/96khz
• Compatible with Windows 10 & macOS High Sierra

5. PreSonus AudioBox (2-in/2-out)

If you are familiar with Studio One DAW, then you should be on the lookout for this one, as Presonus themselves are developing it. Decent priced audio interface packed with lots of amazing features and free tools.

It is a 24-bit resolution device and has a high-quality sampling rate of 44.1 and 48KHz. The new version goes all the way to 96 kHz – which makes it ideal for recording instruments, and vocal.

One of the features I love about PreSonus AudioBox is the Asio Compatibility, which means a significant performance advantage when running FL Studio.

Technical Specifications

• 2-input/2-output channel
• No ADAT option
• USB 2.0 bus powered
• 24-bit/96kHz

One Last Thing!

I hopefully guided you through buying a better interface for Fl Studio, and I gave you some insight on how to choose an audio interface that fits your need, the next thing you need to do is to set up and start using your interface.

If you are using Focusrite Scarlett together with Fl Studio, you can check how to get it set-up in this guide – How To Use Focusrite USB Audio Interface With Fl Studio.

If you aren’t familiar or don’t know much about setting up an interface, use the manual (it’s made to guide you), or drop your comment, and I’ll help you out hopefully.

Fl Studio Mac Microphone Bluetooth

Good luck with good music, and I hope to see you at the top.

Cheap Studio Microphone